No products in the cart.
Roll over image to zoom in
Wide Press to Exit Button – Green Dome Door Release Button, Stainless Steel, IP66
£27.00 inc. VAT (£22.50 + VAT)
- Standard square size – 85 x 85mm
- Fits UK single gang back box – 60mm fixing centres
- Large green dome button
- IP66 rated – internal & external use
- 2mm stainless steel faceplate
- Double pole NO / NC contacts
- 4A contact rating at 30V AC/DC
- Security screws & Allen key included
- Surface back box included
- 1,000,000 operations
- Works -20°C to +60°C
- In stock – fast 1–2 day UK delivery
- Order by 1pm, sent same dayMon–Fri · FREE UK delivery on every order
- 30-day returnsOn unused items
- VAT invoiceWith every order
- Secure checkoutCard, Apple Pay, Google Pay
Or call 0121 714 0770
This wide press to exit button is a full-size square green dome exit button for maglocks, access control and door entry systems. The 85 x 85mm stainless steel plate fits a standard UK single gang back box, so it is the easy choice for walls, block work and replacing an old exit button like-for-like. The large green dome is instantly recognisable as the way out, and the IP66 rating means it can be fitted inside or outside.
Being momentary, the wide press to exit button only signals while it is pressed – press the dome, the lock releases, and the door relocks once it closes. It is a hard-wearing, low-cost upgrade for offices, shops, schools, surgeries and any building with controlled entry.
Why choose this wide press to exit button?
- Standard square size: 85 x 85mm plate with 60mm fixing centres to suit standard UK single gang back boxes.
- Large green dome button: easy to see, easy to press and clearly marked Press to Exit.
- IP66 rated: sealed against dust and water jets – suitable for internal and external use.
- 2mm stainless steel plate: strong, vandal-resistant and easy to clean.
- Double pole NO / NC contacts: flexible wiring for maglocks, access controllers and door entry systems.
- 4A contact rating: at up to 30V AC/DC, with silver contacts.
- Security screws and Allen key included: discourages tampering.
- Surface or flush fitting: surface back box supplied, with anti-rotational mounting.
- Long life: rated for 1,000,000 operations.
Where is a wide press to exit button used?
- Exit side of doors with a magnetic lock or electric lock
- Office, shop and reception entrances with access control
- Communal doors in flats and apartment blocks
- Gates and external doors – thanks to the IP66 rating
- Schools, healthcare and public buildings
- Replacing worn or broken square exit buttons
Need help planning an access control system? The Secured by Design initiative publishes free security guidance for commercial and residential buildings.
Wide or slim – which exit button should I choose?
Choose the wide press to exit button when you have room for a standard square plate or are fitting to a standard single gang back box. If you are fitting to a narrow door frame, mullion or aluminium shopfront, our slim press to exit button is the better fit. For a no-touch option, see the touchless exit button.
Wide press to exit button specifications
| Type | Square green dome press to exit button |
| Operation | Momentary |
| Contacts | Double pole NO / NC, silver contacts |
| Contact rating | 4A at 30V AC/DC |
| Contact resistance | 10mΩ max |
| IP rating | IP66 – internal and external use |
| Faceplate | 2mm stainless steel, wear-resistant legend |
| Button | Large green plastic dome |
| Size | 85mm H x 85mm W x 32mm D |
| Fixing centres | 60mm |
| Operating travel | 2mm |
| Operating temperature | -20°C to +60°C |
| Mechanical life | 1,000,000 operations |
| In the box | Exit button, surface back box, 2 security screws, Allen key |
Installation
Isolate the power first. Mount the wide press to exit button on the secure side of the door, close to the handle and at a height everyone can reach. Use the surface back box supplied, or flush mount it onto a standard single gang box. Connect COM and NO or NC to the exit input of your access controller or maglock power supply, then fix the plate with the security screws. Installation should be carried out by a competent installer. On escape routes, maglocks should also release on power failure and on a fire alarm signal.
Frequently asked questions
Will the wide press to exit button fit a standard back box?
Yes. The 60mm fixing centres suit a standard UK single gang back box, and a surface box is also included.
Can I fit it outside?
Yes. It is IP66 rated for internal and external use.
Will it work with a maglock?
Yes. Wire it to the exit input of your maglock power supply or access controller. It pairs well with our 275kg magnetic lock kits.
Are tamper-proof screws included?
Yes. It comes with 2 security screws and an Allen key.
Why buy from All Fitting Hardware?
- In stock with fast 1–2 day UK delivery
- Free UK delivery on every order
- VAT invoice with every order
- Easy 30-day returns on unused items
- Expert help on 0121 714 0770 or WhatsApp
Order your wide press to exit button today, or browse our full range of access control products.
