No products in the cart.
Glass Door Corner Strike Box – Transom Corner Patch Fitting, Satin Stainless
£22.00 inc. VAT (£18.33 + VAT)
In stock
Corner strike box for frameless glass doors. It fits over 10–12mm glass at the transom corner and gives the patch lock bolt a strong, secure keep.
- Fits 10–12mm toughened glass
- Satin stainless finish
- Easy clamp-on fitting
- Free UK delivery
- Order by 1pm, sent same dayMon–Fri · FREE UK delivery on every order
- 30-day returnsOn unused items
- VAT invoiceWith every order
- Secure checkoutCard, Apple Pay, Google Pay
Or call 0121 714 0770
SKU:
AB04782472
Category: Patch Fittings
Tags: corner strike box, frameless glass door fittings, glass door lock keep, glass door strike, patch lock keep, shopfront door fittings, transom corner fitting
This corner strike box is the keep that a glass door patch lock bolts into, fitted at the corner where the door meets the transom (overpanel) and side panel. It clamps over 10–12mm toughened glass and gives the lock bolt a solid, neat housing. It suits shopfronts, offices, reception areas and internal glass partitions.
It has a satin stainless finish to match standard patch fittings. A replacement corner strike box is a quick fix if your old keep is damaged, worn or stops the door locking properly.
Why choose this corner strike box?
- Easy fit: clamps straight over the glass with gaskets. No drilling into the frame is needed on standard pre-cut glass.
- Strong and secure: a solid diecast body gives the patch lock bolt a firm keep.
- Fits 10–12mm glass: works with the standard toughened glass used on frameless doors and overpanels.
- Matching finish: the satin stainless look blends in with satin patch locks and corner fittings.
- Great value replacement: replace just the strike instead of the whole fitting set.
- Fast UK dispatch: in stock and shipped quickly, so your door is secure again fast.
Corner strike box specifications
- Type: transom corner strike box / lock keep
- Position: corner of the door opening, at the transom (overpanel) and side panel
- Glass thickness: 10–12mm toughened glass
- Body: heavy-duty zinc alloy / aluminium diecast
- Finish: satin stainless (satin nickel plated)
- Fixing: clamp-on with gaskets and cover plate
- Use: frameless glass doors, shopfronts, offices and partitions
Where does the corner strike box go on a glass door?
The corner strike box fits at the corner where the glass door meets the transom and side panel, and gives the patch lock bolt a keep to lock into. It is used on frameless glass shopfronts, office entrances, showrooms and internal glass screens.

It works alongside our glass door patch lock and corner transom patch fitting, so you can build or repair the whole door from one supplier.
Patch fittings for a complete frameless glass door
A frameless glass door uses several patch fittings that work together. Use this table to check you have every part you need.
| Part | What it does |
| Bottom patch fitting | Clamps the bottom corner of the door and sits on the floor spring or pivot |
| Top patch fitting | Clamps the top corner of the door and connects to the top pivot |
| Top pivot | Fixed above the door – the top of the door turns on it |
| Floor pivot | Floor spindle for doors that do not need to self-close |
| Non digging floor spring | Self-closing, sits on the floor with no digging out |
| Corner transom patch | Joins the overpanel to a fixed side panel, with pivot |
| Overpanel to wall patch | Joins the overpanel to a wall or frame, with pivot |
| Fin patch fitting | Joins the overpanel to a glass fin, with pivot |
| T connector | Overpanel to centre fixed panel, with 2 pivots |
| Patch lock | Locks the door at the top or bottom rail |
| Strike box | The keep the patch lock bolts into |
| Centre patch lock | Locks a pair of doors at the meeting edge |
| Top corner locks | Left and right hand top locks |
| Door stoppers | Stop the door at the closed position |
| Glass clamps | Fix fixed glass panels to walls and to each other |
See all our glass door patch fittings.
How to choose the right corner strike box
- Glass thickness: our patch fittings suit 10–12mm toughened safety glass.
- Glass cut-outs: notches and holes must be cut before the glass is toughened, so check your glass matches the fitting.
- Left or right hand: for handed fittings, stand outside the door and check which side the pivot or lock is on.
- Finish: match the satin or polished finish of your other fittings for a neat look.
- Door weight: check the weight of your door against the rating of the fitting and the floor spring or pivot.
Not sure? Send a photo of your door and old fitting and we will confirm the right corner strike box before you order.
Fitting tips
Always fit glass door hardware with the gaskets supplied between the metal and the glass, and never over-tighten the fixings, as point loads can crack toughened glass. Check the door is level and swings freely before you finish. Frameless glass doors are heavy, so fitting should be done by a competent glazier or shopfitter. For guidance on glass safety, see the Glass and Glazing Federation.
Looking after your glass door fittings
Wipe stainless fittings with warm soapy water and a soft cloth, and avoid abrasive pads or bleach-based cleaners. Every few months, check the fixings are tight and the door still closes smoothly. Replacing a worn corner strike box early protects the glass and the rest of the door.
Delivery, collection and trade orders
Order your corner strike box by 1pm Monday to Friday for same-day dispatch, with free UK delivery on every order and a VAT invoice included. You can also collect from our trade counters in Dartford, Kent and Wednesbury, West Midlands, Monday to Saturday 8am–6pm. Glaziers and shopfitters can message us on WhatsApp or call 0121 714 0770 for bulk quotes.
Frequently asked questions
What does a corner strike box do?
A corner strike box is the keep that receives the bolt of a glass door patch lock. It is fitted at the corner where the transom meets the side panel, so the door can be locked at the top.
What glass thickness does it fit?
It fits 10mm and 12mm toughened glass. Packing gaskets are included to take up the difference.
Which lock does it work with?
It is designed for the standard glass door patch lock used on frameless doors. If you are not sure, send us a photo and we will check it for you.
Is it real stainless steel?
The body is diecast, with a satin stainless finish that matches standard satin patch fittings.
Why buy from All Fitting Hardware?
- Free UK delivery on every order
- Easy 30-day returns on unused items
- Secure checkout
- Expert help on 0121 714 0770
Browse our full range of glass door patch fittings.





